• Portability - Great for travel - Drink fresh and purified alkaline ionized water anywhere, anytime.
• Lightweight - 5.7 lbs.
• User-friendly
• Sits on the countertop
• No faucet connections necessary
• No hose connections
• Approximate size of a coffee maker

Features:

• No Installation - Just Plug-and-Use. Open the lid on the water container. Fill the water up to the top. Press the Ionized Water Button and Drink!
• Capacity of input water container: 1.5 quarts
• Two Alkaline Levels - Standard or High
• Internal Cleaning Cycle - Control panel has a System Clean Button - cleans the ionizer to reduce calcium buildup on the electrodes. Recommended cleaning weekly.
• Filter materials: Activated carbon, ion exchange resin, and KDF which is used to eliminate heavy metals, sterilize and impede bacterial growth, and control chlorine and organic pollutants in the water. It allows minerals to pass through into the drinking water. For use with cool water only.
• Filter Life - 80 gallons - Filter use is optional when using bottled mineral or spring water.
• Filter replacement indicator - red LED indicates replacement by blinking.
• Filter installation - easy to replace
• Water sources:
  • The best possible water to use with the LifeMost Batch Water Ionizer is a bottled mineral or spring water. (Water must have minerals such as calcium, magnesium, potassium in order to ionize.) If bottled mineral or spring water is used, then the use of the filter is optional.
  • Normal city tap water or safe, potable well water can be used.
  • Do not use purified water, or reverse osmosis, or softened or distilled water.

How to use the Batch Water Ionizer:

Step 1: Be sure the unit is plugged into an electrical outlet, preferably a GFI Safety Outlet. Place the filter o-ring in the top of unit. Place the filter on top of the o-ring so it is securely seated in the unit.

Step 2: You may use bottled, tap or potable well water from your home faucet to fill the tank on the unit. For best results we recommend using a bottled spring or mineral water.

Step 3: Open the lid on the water container. Fill the water up to the top of the container. Do not overflow the upper fill tank. Overflow can result in serious damage to the unit. It may also result in electrical danger.

Step 4: After installing the water filter choose the pH setting (Standard or High). Begin Ionization process by pressing the Ionized Water button in the center of the control panel. Hold until glass or container is full.

Step 5: To use the Acidic Water wait 1-2 minutes after pressing Ionized Water button. Pull out on the Acidic reservoir tank and use as desired. (Not for drinking)